Highly Efficient Solar Modules
Product Description
Performance
Rated Power: 75 watts
Power Tolerance: +-5%
Nominal Voltage: 12 volts
Warranty: 25 years
Configuration
J BP 375J Clear Universal frame and standard J-Box
L BP 375L Unframed laminate version of BP 375S
S BP 375S Clear Universal frame with WireholdTM J-Box and and polarized Multicontact (MC) connectors
Electrical Characteristics:
Maximum Power (Pmax): 75 Watts
Voltage at Pmax (Vmp): 17.3 Volts
Current at Pmax (Imp): 4.3 Amps
Warranted minimum Pmax: 71.3 Watts
Short-circuit Current (Isc): 4.7 Amps
Open-circuit Voltage: 21.8 Volts
Temperature coefficient of Isc: (0.065+-0.015)%/K
Temperature coefficient of Voc: -(80+-10)mV/K
Temperature coefficient of Power: -(0.5+-0.05)%/K
NOCT (Air 20C, Sun 0.8kW/m2, wind speed 1m/s: 47+-2C
Maximum series fuse rating: 15 amp (375S 375L) / 20 amps (BP 375J)
Maximum system voltage: 600 V (US NEC), 1000V (TUV Rheinland & IEC 61215)
Mechanical Characteristics
S,L,J Solar Cells : 36 cells (125 x 125 mm) in a 4 x 9 matrix connected in series
S,L Output cables : RHW AWG #12 (3.3 mm2) cable with polarized weatherproof DC rated Multicontact connectors; asymmetrical lengths -900mm (-) and 800mm (+)
J Junction box: J-Version junction box with 6 terminal connection block; IP 65, accepts PG 13.5, M20, 1/2" conduit, or cable fittings accepting 6 to 12 mm diameter cable. Terminals accept 8 to 14 AWG2 (2.5 to 10 mm) wire.
S,J,L Diodes IntegraBusTM technology includes Schottky by- pass diodes integrated into the printed circuit bus.
S,L,J Construction: Front: High transmission 1/8" (3 mm) tempered glass. Back: White back sheet; Encapsulated: EVA.
S,J Frame: Clear anodized aluminum alloy type 6063T6. Silver universal frame.
Quality and Safety
Manufactured in ISO 9001 certified factories; conforms to European Community Directive 89/33/EEC, 73/23/EEC, 93/68/EEC; certified to IEC 61215
Module power measurements calibrated to World Radiometric Reference through ESTI (European Solar Test Installation at Ispra, Italy)
Framed modules certified by TUV Rheinland as Safety Class II (IEC 60364) equipment for use in systems up to 1000 VDC
Framed modules listed by Underwriter Laboratories for electrical and fire safety (Class C fire rating)
Approved by Factory Mutual Research in NEC Class 1, Division 2, Groups C & D hazardous locations (J version only)
Rated Power: 75 watts
Power Tolerance: +-5%
Nominal Voltage: 12 volts
Warranty: 25 years
Configuration
J BP 375J Clear Universal frame and standard J-Box
L BP 375L Unframed laminate version of BP 375S
S BP 375S Clear Universal frame with WireholdTM J-Box and and polarized Multicontact (MC) connectors
Electrical Characteristics:
Maximum Power (Pmax): 75 Watts
Voltage at Pmax (Vmp): 17.3 Volts
Current at Pmax (Imp): 4.3 Amps
Warranted minimum Pmax: 71.3 Watts
Short-circuit Current (Isc): 4.7 Amps
Open-circuit Voltage: 21.8 Volts
Temperature coefficient of Isc: (0.065+-0.015)%/K
Temperature coefficient of Voc: -(80+-10)mV/K
Temperature coefficient of Power: -(0.5+-0.05)%/K
NOCT (Air 20C, Sun 0.8kW/m2, wind speed 1m/s: 47+-2C
Maximum series fuse rating: 15 amp (375S 375L) / 20 amps (BP 375J)
Maximum system voltage: 600 V (US NEC), 1000V (TUV Rheinland & IEC 61215)
Mechanical Characteristics
S,L,J Solar Cells : 36 cells (125 x 125 mm) in a 4 x 9 matrix connected in series
S,L Output cables : RHW AWG #12 (3.3 mm2) cable with polarized weatherproof DC rated Multicontact connectors; asymmetrical lengths -900mm (-) and 800mm (+)
J Junction box: J-Version junction box with 6 terminal connection block; IP 65, accepts PG 13.5, M20, 1/2" conduit, or cable fittings accepting 6 to 12 mm diameter cable. Terminals accept 8 to 14 AWG2 (2.5 to 10 mm) wire.
S,J,L Diodes IntegraBusTM technology includes Schottky by- pass diodes integrated into the printed circuit bus.
S,L,J Construction: Front: High transmission 1/8" (3 mm) tempered glass. Back: White back sheet; Encapsulated: EVA.
S,J Frame: Clear anodized aluminum alloy type 6063T6. Silver universal frame.
Quality and Safety
Manufactured in ISO 9001 certified factories; conforms to European Community Directive 89/33/EEC, 73/23/EEC, 93/68/EEC; certified to IEC 61215
Module power measurements calibrated to World Radiometric Reference through ESTI (European Solar Test Installation at Ispra, Italy)
Framed modules certified by TUV Rheinland as Safety Class II (IEC 60364) equipment for use in systems up to 1000 VDC
Framed modules listed by Underwriter Laboratories for electrical and fire safety (Class C fire rating)
Approved by Factory Mutual Research in NEC Class 1, Division 2, Groups C & D hazardous locations (J version only)
Have a great Day!
 |
