Power Distribution Panel
Product Description
Xantrex XW Power Distribution Panel (XW PDP)
The XW Power Distribution Panel (XW PDP) with conduit box is factory-wired and labeled to support a code-compliant single-inverter installation. The XW PDP can be configured to mount on either side of the inverter/charger. Internal wiring and breakers can be added to expand the XW System with up to three inverters, four charge controllers, or other equipment to support larger systems.
Accommodates both AC and DC breakers and wiring for three XW Hybrid Inverter/Chargers and four XW Solar Charge Controllers
Includes breakers and wiring to connect to XW Hybrid Inverter/Charger
Wiring is labeled and cut-to-length, ready to connect to inverter
Uses flexible Arctic Ultraflex Blue™ wires
Multiple knockouts on sides, top, bottom and back of unit
Includes mounting back plate and and XW Conduit Box
The SW Power Distribution Panel (XW PDP) is factory-wired and labeled to support a code-compliant single-inverter installation. It has plenty of room to add wiring and breakers to expand the XW System with up to three inverters, four charge controllers, or other equipment to support 120/1240-volt, three-wire, single-phase systems. With a field-reversible door and multiple conduit knockout locations, the PDP can be configured to mount on either side of the inverter/charger.
The XW Power Distribution Panel (XW PDP) is designed to save significant time and money during installation, taking less than 25 percent of the time to install, when compared to competing solutions. A mounting plate and XW Conduit Box is supplied with each XW PDP.
Product Compatibility
The distribution panel and conduit box interface with the following products:
XW Connection Kit (for second XW Hybrid Inverter/Charger) and XW Conduit Box
XW4024, XW4548, and XW6048 Inverter/Chargers
XW Solar Charge Controllers (requires customer-supplied
breakers and wiring)
C-Series Charge Controllers (requires customer-supplied breakers and wiring)
XW PDP dimensions (HWD) 30" x 16" x 8.25" (761 x 406 x 210 mm)
Shipping Dimensions (HWD) 48" x 21" x 13.5" (1220 x 533 x 343 mm) Shipping weight: 67.2 lbs (30.5 kg)
XW PDP ships with
Power Distribution Panel enclosure with a field-reversible panel door, pre-wired with:
Three 60 amp 120/240 Vac, two-poles, Square-D, Type QOU, DIN-rail mounted AC breakers for AC input, Bypass, and AC Load
One GJ205A 160 Vdc, 3/8" stud DC breaker
One ground terminal bus bar
One neutral terminal bus bar
One battery negative terminal bus bar
One pair #4/0 AWG Arctic Ultraflex BlueTM Battery Cables (factory installed and labeled, ready to connect
#6 AWG Arctic Ultraflex BlueTM AC wiring (factory installed and labeled, ready to connect)
Room to expand - Five additional AC breaker positions for two-poles, 60 A Square D, Type QOU breakers; 10 additional DC breaker positions (eight for charge controller breakers and two for large GJ inverter breakers
Mounting Plate
XW Conduit Box
The XW Power Distribution Panel (XW PDP) with conduit box is factory-wired and labeled to support a code-compliant single-inverter installation. The XW PDP can be configured to mount on either side of the inverter/charger. Internal wiring and breakers can be added to expand the XW System with up to three inverters, four charge controllers, or other equipment to support larger systems.
Accommodates both AC and DC breakers and wiring for three XW Hybrid Inverter/Chargers and four XW Solar Charge Controllers
Includes breakers and wiring to connect to XW Hybrid Inverter/Charger
Wiring is labeled and cut-to-length, ready to connect to inverter
Uses flexible Arctic Ultraflex Blue™ wires
Multiple knockouts on sides, top, bottom and back of unit
Includes mounting back plate and and XW Conduit Box
The SW Power Distribution Panel (XW PDP) is factory-wired and labeled to support a code-compliant single-inverter installation. It has plenty of room to add wiring and breakers to expand the XW System with up to three inverters, four charge controllers, or other equipment to support 120/1240-volt, three-wire, single-phase systems. With a field-reversible door and multiple conduit knockout locations, the PDP can be configured to mount on either side of the inverter/charger.
The XW Power Distribution Panel (XW PDP) is designed to save significant time and money during installation, taking less than 25 percent of the time to install, when compared to competing solutions. A mounting plate and XW Conduit Box is supplied with each XW PDP.
Product Compatibility
The distribution panel and conduit box interface with the following products:
XW Connection Kit (for second XW Hybrid Inverter/Charger) and XW Conduit Box
XW4024, XW4548, and XW6048 Inverter/Chargers
XW Solar Charge Controllers (requires customer-supplied
breakers and wiring)
C-Series Charge Controllers (requires customer-supplied breakers and wiring)
XW PDP dimensions (HWD) 30" x 16" x 8.25" (761 x 406 x 210 mm)
Shipping Dimensions (HWD) 48" x 21" x 13.5" (1220 x 533 x 343 mm) Shipping weight: 67.2 lbs (30.5 kg)
XW PDP ships with
Power Distribution Panel enclosure with a field-reversible panel door, pre-wired with:
Three 60 amp 120/240 Vac, two-poles, Square-D, Type QOU, DIN-rail mounted AC breakers for AC input, Bypass, and AC Load
One GJ205A 160 Vdc, 3/8" stud DC breaker
One ground terminal bus bar
One neutral terminal bus bar
One battery negative terminal bus bar
One pair #4/0 AWG Arctic Ultraflex BlueTM Battery Cables (factory installed and labeled, ready to connect
#6 AWG Arctic Ultraflex BlueTM AC wiring (factory installed and labeled, ready to connect)
Room to expand - Five additional AC breaker positions for two-poles, 60 A Square D, Type QOU breakers; 10 additional DC breaker positions (eight for charge controller breakers and two for large GJ inverter breakers
Mounting Plate
XW Conduit Box
Have a great Day!
 |
